View larger image



Price: 300.00  €

Applications of SOLARMETER 5.0 :

• Lamp UV Intensity and Aging
• Acrylic Shield Transmission
• Eye Wear UVB Block Comparison
• Window Film/Tint Transmission

Features and Benefits of SOLARMETER 5.0 :

• Hand Held Integral Sensor
• Accurate Calibration
• NIST Traceable
• Compact and Durable
• LCD Readout

Sensor :

The sensor consists of a GaAsP photodiode chip and a UV filter. It is completely insensitive to visible light longer than 400nm and infrared radiation because its spectral response only covers the UV region from 260-400nm. Applications include solar UV detection as a spectral response is well matched to the solar UV spectrum.

Meter Operation :

To operate your Solarmeter, aim the sensor window located on the top panel of the meter directly at a UV source. Press and hold push-button switch on face of unit. Am sensor window in top panel of meter directly at UV source. Note reading on LCD and record if considered.

Battery operation voltage is 9V down to 6.5V. Below 6.5V the LCD numbers will begin to dim, indicating the need for a battery replacement. Under “typical” service load, the battery should last about 2 years.

Proper Usage of Solarmeter® Ultraviolet Meter for Lamp Aging Tests :

• Wear eye protection when checking UV lamps (Glasses that provide wrap around protection are ideal).
• Allow lamps to warm-up prior to taking readings (at least 5 minutes).

Lamp Aging :

• When checking lamp aging, make sure to use the same location and distance to ensure accurate readings.
• Lamps should be replaced when output drops to about 70% of their original (new) readings.

Curing Lamps :

• For curing lamps, hold the meter at the distance you intend your work piece to be cured.

Tanning Lamps :

• To take the overall reading at the center of the tanning bed, place meter pointing up with canopy closed.
• To take individual lamp readings, hold the meter against the acrylic with canopy open.
• If you are unsure of original lamp values, replace two adjacent lamps identical new ones and compare.
• This meter is primarily “seeing” the UVA “browning” rays. For erythemal readings use Model 7.0 MED/hr meter.

Acrylic Testing :

• For acrylic testing, take readings with and without acrylic at a fixed distance. Model 6.0 is best for acrylic tests.

General :

• When comparing different types of lamps consider readings to be relative rather than absolute.
• Lamps that peak near 365 nm (newer designs) will read higher than lamps that peak near 350 nm.
• Do not subject the meter to extremes in temperature, humidity, shock or dust.
• Use a dry, soft cloth to clean the instrument. Keep sensor free of oil, dirt, etc.

Specifications :

Irradiation Range : 0-199.9 mW/cm² Total UV
Response : 280-400nm (UVB through UVA)
Resolution : 0.1 mW/cm²
Conversion Rate : 3.0 Readings/Sec
Display : 3.5 Digit LCD
Digit Size : 0.4 inch high
Operation Temperature : 32° F to 100° F
Operation Humidity : 5% to 80% RH
Accuracy : ±5% to NIST Ref. Meter
Dimensions : 4.2L x 2.4W x 0.9D (in.)
Weight : 4.5 OZ (incl. batt.)
Power Source : 9-Volt DC Battery
Lens : UVT Acrylic Diffuser

Ordering Information :

Model 5.0 : UVA & UVB Radiometer

Virtuavia is the French Distributor for Solarmeter. Solarmeter® is Solar Light Company Inc.'s brand of specialty hand-held light meters. We are the industry leader in the design and manufacture of UV and Visible Light radiometers for measuring lamp irradiance vs aging, as well as other related applications serving the indoor tanning industry, window film tint measurement, outdoor UV Index measurement, UV curing, reptile and sterilization lamp measurement, red/blue light phototherapy, LED measurement, and photovoltaic (PV) solar irradiance metrology. These meters provide long term accurate measurements for both low and high intensity lamp systems, in order to enable output and aging determination. They also measure solar irradiance. Solar Light Company, Inc. is recognized worldwide for over 50 years as America's premier manufacturer of precision ultraviolet light sources, solar simulators, and radiometers. Our standard line of UV, visible, and IR radiometers and light meters measure laboratory, industrial, environmental, and health related light levels with NIST traceable accuracy. Column ozone, aerosol, and water vapor thickness measurements, in addition to long-term global ultraviolet radiation studies all over the world are performed using our atmospheric line of instrumentation. Solar Light also provides NIST traceable spectroradiometric analyses, calibrations for light meters and light sources, OEM instrumentation and monitors, and accelerated ultraviolet radiation degradation testing of materials.

Solarmeter® is a registered trademark of Solar Light Company, Inc.