- Click on the "Cue" icon on the toolbar. The following screen appears:
- Press the "insert seq. "
button
- Select the scene or sequence you would like to insert in the list and drag it to the cue list.
- Repeat until all desired sequences are loaded into the list
To play a sequence, press on the corresponding sequence button.
All sequences can run a the same time with LTP (latest takes precedence).
Set the playback speed off a sequence by sliding the corresponding speed slider to the desired speed. Right click on it to set it back to 100%
During playback you can override all DMX values, to do this you only have to change the sliders and or Gobo / Color / Pan Tilt /… settings. Automatically the corresponding button under the slider (on the main screen) will turn blue.
Also in the gobo - color - Pan/Tilt - … windows the corresponding button will turn blue.
(To undo override press the blue button.)
To undo all override settings at once press 
.
To instantly blackout all fixtures press the "Blackout" button on the mainscreen or "TAB"
Other Cue functions / options:
Manual trigger: All running sequences are triggerd to the next scene and pauzed.
Repeat sequence or single play 
Reverse: Play the sequence reversed 
Random: Play random scenes from the sequence.
Restore DMX values when sequence stopped:
Control sequence by time (elapsed / realtime):
To enable time control: "options" -> "Enable timecode" -> "Timecode elapsed" or "Timecode realtime"
Timecode elapsed: The timer starts at 00:00:00
Timecode realtime: Windows time
Fill in the time in following format: hh:mm:ss
After setting all options you can save the cue.
Afterwards you can recall the cue very easy with the "Fast cue switcher" 
When you want to sync. the speed of the running sequences with an external signal you can use the "Tap Sync." button.
You must press the button 3 times (blue led wil flash), if red led is on tap is disabled.
